HEAVY GAUGE SHEAR LINE is the facility that cuts loaded coils into HR STS sheets with customer's requested length. HEAVY GAUGE SHEAR LINE is composed of facilities such as an UNCOILER that uncoils strips and a shear that cut coils and a piler that carries products.


DOUBLE CONE TYPE UNCOILER is capable of adjusting the outside diameters of drums to 508, 610 and 762.
 
With shearing capacity of wide-width up to 2 meters, Kwangil Corp. is supplying customers with various high quality products.
 
4-HI and 13-roll LEVELER has 13 working rolls, i. e. 6 at upper part and 7 at lower part of sheets and 15 back-up rolls. It can equalize the internal stress when coils running through, to produce the sheet flatness get higher.
 
STOP RUNNING CUTTING TYPE enables to perfectly to shear sheets with thickness up to 13 and 13,000 length.
 
With the installation of SHEET LEVELER, clean edges of threaded sheets are enhancing the quality of products by one more notch.
 
It is possible to recoil goods perfectly up to 13 thickness
 
VINYL, PAPER COATER is a kind of equipment to coat the sheets with vinyl and paper to protect strip surface from scratch for their clean surface.
 
AUTO PROGRAM installed TOUCH PANEL makes it possible to set precise working length.


PROCESSING CAPACITY
thickness
(mm)
width
(mm)
length
(mm)
length
tolerance
square
tolerance
weight
per unit
production
capacity
3.0~13.0 900~2,000 1,000~13,000 0.1/2M
3.0/2M
25tons 42,000ton/year